Throw: 200 metres
Beam Type: Aspheric - spot adjustable to flood
Length: 150 mm
Lumens: 1210 lumens
Throw: 200 metres
Length: 150 mm
Beam Type: Aspheric – spot adjustable to flood
The NiteHunter was always designed to be a hunting torch, from it’s large rotary adjustable aspheric head – which resists movement from heavy calibres - to it’s dual tailcap which enables it to be used with a tapeswitch on the rifle and without one off. Providing a spot out to 225 metres the NiteHunter may be all the hunting torch you need.
Light Output and Beam Pattern
The NiteHunter torch with its large aspheric head and slightly greater distance than usual between LED and aspheric lens (magnifying glass) concentrates every one of its lumens into it’s spot to provide a good beam out to 225 metres. This can be adjusted back to flood. There is a high beam, medium and low beam.
TTT and Construction
Like all of the Wolf Eyes LED Hunting Torches the NiteHunter is built around the brass TTT – Thermal Transfer Tube. The Thermal Transfer Tube has three benefits, it strengthens the total body structure, it enhances electrical conductivity and most importantly drags damaging heat away from LED. If overheated LEDs suffer permanently reduced output.
The rest of the body is made from aircraft grade aluminium which is then low temperature (-20o C) Hard Anodized tactical black.
The tailcap is the Wolf Eyes Dual Tailcap, which means you can use it like a regular tailcap or screw on the included tapeswitch for faster control of your light. The Dual Tailcap also features a spring in it, combined with the spring at the front of the body, the two springs contain the battery which can move but electrical contact is maintained at all times, even with heavy calibres.
The NiteHunter LED Hunting Torch is regulated, meaning it doesn’t dim as the battery flattens. Torches usually dim as the battery flattens, sometimes just a little and often a lot. This is because the battery reduces in voltage as it flattens. The solution to this regulation, this increases the amperage as the voltage is reduced, so the optimum power or cuurent is always supplied to the LED.
The Wolf Eyes LRB168A lithium ion battery (18650) supplied with the NiteHunter torch light is also used in all our other hunting torches and headlamps, giving you interchangeability. This is both an energy dense battery (meaning you only need one and so can keep the 25.4mm – 1” -standard firearm body size) and also protected for your safety.
All Lithium Ion powered Wolf Eyes LED torches work well in cold weather, the NiteHunter hunting flashlight being rated from -20o C to +60o C.
Australian Approved Charger
The charger with your Wolf Eyes LED Torch is Australian Approved, meaning that you can feel safe using it and all your insurances will apply.
Your Wolf Eyes Torch is fully supported within Australia. We have spares here with solid stocks to support our Police and Military partners, we also have a 1300 911 007 phone number to provide over the phone assistance. After hours there is live answering on this line so you can be looked after during working hours.
Wolf Eyes NiteHunter at 225 metres
Insert of of Wolf Eyes NiteHunter at 225 metres
Video of the Beam of the standard Hunting NiteHunter showing tight spot
Video of the beam of the 1,000 + lumen NiteHunter showing the broader spot
Be The First To Review This Product!
Help other wolfeyes.com.au users shop smarter by writing reviews for products you have purchased.